This product functions as is a vacuum pump, capable of achieving an ultra-high vacuum of 10-8Pa or lower when employed for evacuation or baking in conjunction with a dry pump or turbo molecular pump.
Bellows
Titanium Bellows for correction quadrupole magnets of the 3GeV RCS at J-PARC Formed titanium bellows with RF contact functionality
Big-beam position monitor for the 3-GeV rapid-cycling synchrotron beamline at J-PARC (Big-BPM)
Formed bellows (600 mm) constructed from Grade 1 commercially pure titanium.
Bellows with RF contact at 50GeV in the J-PARC Formed titanium bellows with RF contact functionality
Pump Port with Finger-type RF Shield Bellows at 50GeV in the J-PARC It is used as a component to connect a ring to the vacuum exhaust equipment.
Products delivered to J-PARC We supply products ranging from monitors to bellows ducts.
Overview of JT-60SA Port Bellows Welded bellows for use in nuclear fusion facilities.
Bellows chamber for the XFEL accelerator Welded bellows with integrated square-shaped RF contacts.
Long-travel welded bellows for the GAMMA10 at the University of Tsukuba Long-stroke bellows used in vertical drive mechanisms.
The long welded Bellows for medical markets Welded bellows for transfer systems in freeze-drying equipment.
Wave-less Large-sized rectangle Welded bellows Used to compensate for misalignment between the vacuum chamber and the gate valve.
Thermal insulation double pipe type flexible tube ( Transfer Tube ) Offers excellent thermal insulation performance in the temperature range of -196°C to 200°C.
Damper Bellows for Cell Conveyance Transport case designed to minimize cellular damage.
Valve
FFT series Flat seal Valve Actuated exhaust valve enabling high vacuum without film lamination.
Reversing Valve Bidirectional sealing capability for reduced takt time.
For semiconductor manufacturing equipment 300mm (12inch) Gate Valve
Recognized as an essential valve for semiconductor equipment.
Medical
Bellows for a force feedback device of surgical robot Welded bellows utilized in haptic feedback devices.
Components
Proton beam profile monitors (driven) Proton beam monitoring device with vacuum-facing components made of pure titanium.
Mirror chamber for KEKB SUS-based SR monitor incorporating an oxygen-free copper beam duct.
